Send your latest releases to editorial@dfamedia.co.uk

Published:  16 April, 2015

dialight.jpgDialight, a global leader in LED lighting technology, has introduced the emergency version of its SafeSite and DuroSite Stainless Steel Linear fixtures with a new one-piece design.

Published:  16 April, 2015

hughes_pumps.jpgTwo flushing and testing systems, manufactured and supplied by UK specialist Hughes Pumps, are said to be proving the integrity of flexible flowlines being laid to the seabed in up to 2,200m water offshore in Brazil’s Campo Basin.

Published:  15 April, 2015

dean_smith__grace.jpgDean, Smith & Grace says after a long and illustrious history producing some of the world's most advanced and renowned flat bed lathes, it is moving to a new R & D and manufacturing facility at MTTG, its parent company's headquarters in Halifax, Yorkshire.

Published:  15 April, 2015

Ovako_SZ-Steel.jpgAs companies push the limits of performance in cold climates and harsh environments, demand for strong, safe and well-proven materials is on the rise. Components like pipeline bolts, hydraulic parts and offshore lifting devices must offer greater reliability at -50°C or lower sub-zero temperatures.

Published:  10 April, 2015

hydrotechnik.jpgHydraulics are commonly utilised to control the yaw, pitch and braking systems on modern wind turbines. Accumulators are typically used along with hydraulic power units to feather the blade pitch. Accumulators can also serve as an auxiliary power storage device to quickly and safely rotate the blade to a null position in extreme wind conditions.

Published:  10 April, 2015

nord_lock.jpgThe Nord-Lock Group, a world leader in bolt securing systems reports it offers a unique combination of bolting expertise and a wide product range, including wedge-locking solutions and Superbolt tensioners.

Published:  10 April, 2015

FKT2764-logo.gifAttend the no.1 event dedicated to the global subsea vessel sector. Meet 150+ attendees at Subsea Vessels Europe to improve the interface between oil and gas companies, subsea vessel operators, and subsea hardware suppliers.

Published:  08 April, 2015

victaulic.jpgVictaulic, a global manufacturer of mechanical pipe-joining systems, reports it has appointed Ian Lawless as vice president, oil and gas, Europe.

Published:  08 April, 2015

endress__hauser.jpgWith the introduction of a new high pressure electromagnetic flowmeter, Endress+Hauser says it now offers a complete portfolio of instrumentation for the oil & gas industry. Robust and approved for use in hazardous areas, the Promag 53 is said to be ideal for demanding environmental and process conditions and for both upstream and downstream applications.

Published:  08 April, 2015

bell_flow_systems.pngBell Flow Systems says specifying the correct flow meter for any application is important but becomes absolutely critical in potentially explosive environments.

Published:  01 April, 2015

Arc_Energy_Resources.jpgWeld overlay cladding specialist Arc Energy Resources reports it has successfully completed a contract for supply of two riser joints for Aquaterra Energy, a provider of award-winning offshore solutions.

Published:  01 April, 2015

belzona-ART.jpgDesigned to endure the physical and thermal shock common to the marine environment, Belzona says its new chocking/grouting compound is specifically formulated to spread out evenly across irregular surfaces.

Published:  13 March, 2015

Litre_Meter_Lewa_presentation.JPGUK flowmeter specialist Litre Meter reports it has presented another award for outstanding sales performance to its US distributor LEWA-Nikkiso America Inc.

Published:  12 March, 2015

smith_flow_control.jpgSmith Flow Control says its GL and QL interlocks withstood temperatures of up to 1000°C in recent tests. Performed by Score Group plc, the tests found the QL and GL to be compliant with the temperatures and conditions specified in API Standard 607 Sixth Edition – 2010 and ISO 10497:2010.

Published:  26 February, 2015

HTL_Worldwide_-_Logo.jpgHydraulic bolting equipment manufacturer HTL Worldwide reports it has spread its wings to officially become HTL Worldwide Ltd. The newly announced limited company was previously a global extension of Hire Torque Ltd, however due to reported impressive growth rates, the once supporting brand of Hire Torque has shaped into its own unique company to pursue continued growth.

Published:  19 February, 2015

dialight.jpgDialight, an expert in LED lighting technology has introduced the emergency version of its SafeSite and DuroSite Stainless Steel Linear fixtures with a new one-piece design. The company says the well-established emergency fixtures, available with both CE and ATEX certifications, provide at least three hours and up to eight hours of battery backup in temperatures from -20°C to 65°C.

Published:  18 February, 2015

ferguson_group.JPGFerguson Group supply a range of a DNV 2.7-1/EN 12079 chemical, acid, cryogenic and bunded tanks, as part of its fluid solutions service. The company says tanks come in a range of sizes, can operate to -40°C, have remote vent valves and level guard/safe stick for safe operation.

Published:  18 February, 2015

winn__coales.jpgAtlantic Wind Services (MCR) Ltd of Manchester has recently completed the base foundation, infrastructure and other civil works for a new on-shore wind turbine at Darrington, Yorkshire.

Published:  18 February, 2015

Ametek.jpgAMETEK Process Instruments reports it has introduced its third generation H2S/SO2 tail gas analyser with significant reliability advances for control of the Claus sulfur recovery process. The company says new features of the Model 888 Sulfur Recovery Tail Gas Analyser overcome the three most common external failure modes encountered by Sulfur Recovery Units (SRU).

Published:  11 February, 2015

smith_flow_control.jpgSmith Flow Control (SFC), specialist in mechanical valve control equipment and valve management systems, has announced the appointment of Triton Engineering as its distributor in Aberdeen. Triton is a specialist provider of engineering consultancy services to the upstream oil and gas industry, with its core business being pipelines and risers.

Published:  04 February, 2015

mayr-roba-stop-s-safety-brake.jpgMayr says its ROBA-stop-S is an electromagnetic fail-safe brake that has been developed specifically to operate in arduous, wet and corrosive environments. It is designed to hold a system in position when the drive has been switched off and in emergency situations such as E-stop or power failure, the brake can act dynamically to bring the load to rest.

Published:  30 January, 2015

TrellTrelleborg.JPGA new information hub has been launched to showcase best practice in sealing technology in a bid to provide “solutions for tomorrow’s engineering”.

Published:  02 December, 2014

hughes_pumps.jpgHughes Pumps reports that a powerful water-jetting unit, which uses a smart innovation, is helping deliver essential corrosion prevention maintenance to a semi submersible offshore drilling rig that works extensively in the harsh North Sea, UK environment.

Published:  02 December, 2014

Halifax_Machine_Tool_Company.jpgHalifax Machine Company reports it has designed and manufactured a new generation of high performance deep hole boring machines that offer the most cost-effective machining solutions.

Published:  02 December, 2014

Ametek_-_new.jpgAMETEK Rotron has introduced a compact liquid cooling heat exchanger assembly that can dissipate over 10 KW of heat in demanding shipboard, and industrial applications.

Last issue

View the last issue here.

View the past issue archive here.