Two-in-one cable guide clamp
Published: 31 July, 2015
Ellis, says it is planning a world first at Offshore Europe 2015 – Stand 3C62 - by unveiling its two-in-one cable guide and clamp. Designed specifically to assist in the installation and subsequent restraint of high voltage (HV) cables, Elis says the cable guide clamp was initially developed for an offshore project for Siemens prior to Ellis’ in-house team designing and manufacturing a full range suitable for use with large diameter cables.
The dual purpose solution enables cables to be guided by it into their final location, while trumpeted entry and exit points ensure the cable is not damaged when fed through particularly sharp angled turns. Once the cable is laid correctly, the top half of the guide is removed, a fixing piece installed directly onto the cable and the top half re-secured, thus turning it into a fully-functioning HV cable clamp.
Ellis 01944 758395 www.ellispatents.co.uk
Click here for the full unedited version of the release as provided by the company
